AU1250 Single Board Computers

SBC1200overview
SBC1250 is a Ready-to-Use Single-Board-Computer (SBC) designed by KJ Tech to enable developers toquickly create the next generation of small, embedded,multi-functional products, such as IPTV-STB, network video player, home media gateway, POS terminals, KIOSK, automotive, navigation devices, industry panel PC and acquisition terminals. The board incorporates a high performance RMI Alchemy AU1250 processor, DDR2 SDRAM and an extensive setof interface controllers, provides high-performance computingpower and unique multimedia support (MPEG1, MPEG2, MPEG4, WMV9,DIVX, H.264, RM, RMVB decoding at full D1 30fps) at low powerconsumption.
SBC1250 package includes:

1. SBC1250 Single-Board-Computer
2. WindowsCE5.0 bootloader / BSP and CE image building guide
3. SBC1250 Single-Board-Computer UserGuide
4. Optional Accessories：
SBC1250-DEBUG-A Serial debug adapter for SBC1250
PDK1200-DC12V2A 12V2A AC/DC Power adapter
PDK1200-REMOTE IR remote with 18keys ( custom OEM service also provided )
PDK1200-LCD-KIT-A LCD panelwith touch screen
10.4” TFT LCD,800x600 resolution
LCD Backlight Inverter
10.4” 4-wire resistance touch screen
Features:

CPU		CPU	Au1250@400MHz / 500 / 700MHz
		NOR Flash	512KB with bootloader pre-installed
		DDR SDRAM	DDR-2, 128MB
		RTC	CPU Built-in RealTime Clock, Battery backed
Peripherals	Audio	Microphone In	Mono
		Line Out / Headphone	3.5mm Jack, Stereo output
		Amplifier	On-board 2W x 2ch, stereo output to 2 speakers
	Video	LCD	TTL Interface for 18bit TFT LCD panels
			Single & Dual channel LVDS Interface for 18/36bit or 24/48bit TFT LCD panels.
		VGA	DB-15 VGA port
		Backlight Control	On-board backlight control interface, with ON/OFF and Brightness control
		Resolution & Frame rate	Supports 4.3” to 20”plus LCD panels, from 320x240 to 1280x1024 resolution, resolution & frame rate configurable through 6bit jumpers,
	USB	Host	4 ports. USB2.0 High speed (480Mbps). compatible with USB 1.1
	Storage	SD Card	1 x microSD card slot, used like one IDE disk on PC, support SDHC up to 32GB
		USB-disk	USB expansion
	Network	10/100Mbps	1 x RJ45 port, with Link/Act LED indication
		802.11bg WiFi (optional)	USB Wifi dongle
		GPRS / CDMA1x (optional)	UART TTL expansion
		GPS (optional)	UART TTL expansion
		Blue-tooth (optional)	USB expansion
		HSDPA (optional)	USB expansion
	SerialPorts	UART with HW flow control	1 x DB9 Jack, standard RS232, or 1 x 6-pin Header TTL signal level, can be used forGPRS/CDMA1X modems, GPS modules etc
		I2C	I2C header for Sensors or GPIO expansion
	Human Input	Touch